You get three new tube segments and two rubber caps, the lower strap (the mast needs 2 guys) and the material for the additional rubberized clamps to convert your 12m HD mast including guying.

Simply remove the old main tube from your 12m HD mast and instead attach the three new segments "at the bottom" (insert the remaining eleven segments of the 12m mast into the new three), assemble the two additional clamps and pull on the additional guy strap at the bottom, the old strap at the top, and the 14m HD mast equipped for permanent assembly is ready.

At this 2nd guying level, with a proper tensioning in 4 directions, there is a rope requirement of approx. 33m. Full

All our fiberglass masts can easily be shortened by any segment (just open and remove at the bottom). So you can only use the desired length for other models, such as turning an 18m mast into a stiffer 14.9m mast

Features

• Height (length): 14m
• Transport length: 1.19m
• Weight: approx. 5kg
• Diameter bottom: 65.5mm (without rubber cap)
• Diameter top: 8mm
• Wall thickness: 1.4mm (top) - 2mm (bottom)
• Number of segments: 14
• Material: Fiberglass, black, UV-resistant, multi-layer wound and specially reinforced