PowerVerter USB Chargers can be easily installed onto any vehicle and allow both drivers and passengers to readily access power to charge any device connected via a USB lead.

The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly.

TECHNICAL DATA

• Input voltage range: 9-32Vd
• Output voltage: 5Vdc +/-0.2v
• Output power: 2.1A
• Off load current (Quiescent current): max. 1.7mA
• Transient voltage protection: Meets ISO7637-2 international standard for 12v/24v vehicles
• Power conversion efficiency: 90%
• Isolation: Non-isolated, >400Vms only between casing and terminals.
• Casework: Black polycarbonate body
• Connections: Input 6.3mm push-on flat blade connectors, output USB type single socket-tested to 10000 mating cycles
• Output indicator: Blue LED output indication
• Mounting method: 30mm diameter hole with or without bezel.
• Transients: Protected by filters and rugged component
• Approvals: 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive, AES5, ECE R118,02 and UL94: V-0
• Designed to: EN50498, ISO 7637-2 To fully meet railway approval to EN50155, EN45545-2 and EN50121-3-2 it is to be used in conjunction with a PV6i-R, PV12i-R or PV24i-R
• Markings: CE and E (automotive) marked
• Output noise: Max. 50mV
• IP ratings: IP30
• weight: 20g