Ameritron's Remote Coax Switch lets you remotely switch up to five separate antennas using one inexpensive small control line (like standard telephone wire) -- Eliminate a tangle of troublesome coax and have a simple and neat installation - with just a single feedline.

The RCS-8V consists of two units - the weatherproof switching box that mounts on your tower or mast and the control unit that's placed at your operating station. - great for the HF/VHF/UHF operator.

The indoor control unit is all metal to prevent RFI and TVI. It also has LEDs to indicate the antenna you've selected.

A Lexan scratch-proof panel has a markable surface for labelling your antenna positions.

RCS-8VX operates from a 240VAC power source. Use any 6 conductor control line (not supplied) and allows safe operation with 14V control voltage.

Specification

• Number of Antenna Positions: 5
• Loss at 150MHz: Less than 0.1dB
• VSWR: Under 1.2:1 from DC to 250MHz
• Impedance: 50 Ohms
• Power Capability: >5kW below 30MHz, 1kW at 150MHz
• Power Requirements: 12VDC at 100 mA. AC adaptor supplied
• Connectors: "N"
• Control Box: 6D x 61/8W x 21/4H inches
• Switch Box: 53/8D x 7W x 3H inches