The ID-50E is a compact VHF/UHF dual bander with both D-STAR (Digital Smart Technology for Amateur Radio) and FM dual modes. Connecting to the Digital network, you can call a friend in another city, or other regions around the world with the ID-50E. Smart functions such as Band Scope and Picture Sharing function enhance your QSO experience. Enjoy worldwide communications through D-STAR network.

The DR function makes communications using D-STAR repeaters easier and simple. Just selecting “FROM”(access repeater) and “TO” (destination), you can make QSO calls including Local Area call, Gateway call, and Simplex call. Combined with the GPS function, you can make selection of a local repeater available based on your location. In addition, the DR function supports reflector linking controls.

You can share pictures with each other in the DV mode. Photos on your Android™ devices can be edited and shared on the picture utility software, ST-ID50A. Utilizing windows PC through a microSD card or a USB cable is also available with the ST-ID50W. It is possible to check your pictures on the ID-50E display before sending it to others. Enjoy sharing pictures together with voice messages.

* Share Picture function requires the optional picture utility software ST-ID50A (on Google Play™) or ST-ID50W (Download from Icom website) and user supplied USB Type-C/USB Type-C cable.

Even in the area with no D-STAR repeaters, build your own internet gateway (using Terminal mode and Access Point mode*) to access the D-STAR network virtually anywhere. Building an Access Point is easy, by connecting your ID-50E to a PC or an Android™ device connected to the internet, you will be able to make another D-STAR radio user to communicate through the D-STAR network over the air.

• The RS-MS3W optional software (Download from Icom website) and user supplied USB Type-C to USB Type-C cable are required for Access Point mode. The RS-MS3A optional application software (Download on Google Play™) and user supplied USB Type-C to USB Type-C cable are required for Terminal mode.
• Terminal and Access Point modes are compatible with the Icom RS-RP3 Gateway Software. If your D-STAR repeater is running G1 or G2 software, ask the repeater administrator to contact the local Icom Distributor to upgrade the software.
• You need an Internet connection with an IPv4 Global IP address. If you use a cellular system, you need an IPv4 Global IP address assigned to your Android™ device.