The IT-100 is the ideal tuner for your shiny new Icom. First, it matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go. And, it has 2,000 (not a typo that's 2,000!) memories, enough for every Dxpedition, RTTY spot and radio buddy you've got, and then some. Just hit the tune button on the radio, and your IT-100 will set tuner parameters in less than a second if you've been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Don't need the tuner just now? Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line -- it's just that simple.

Key Features/Specifications:

• 0.1 to 125 watt power range (SSB and CW), 100W on 6M.
• 2000 memories for instantaneous band changing.
• Controlled from Icom Tuner button on radio or Push button on Tuner.
• Compatible with any Icom radio that is AH-4 or AH-3 compatible. (6M tuning from Tuner button for radios that are only AH-3 compatible)
• Partial radio list: IC-7000, IC-706, IC-718, IC-746 and IC-756.
• Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
• 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
• Tunes 4 to 800 ohm loads (16 to 150 on 6M), 4 to 3200 ohms with optional 4:1 Balun.
• For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
• Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
• Includes Icom interface cable and coax jumper. Ready to use right out of the box.
• Small Size Enclosure: 6.5L" x 6.5W" x 1.25H". Weight: 1.5 pounds