LDG's new KT-100 serves as a dedicated tuner for Kenwood radios: just press the Tune button on the radio. The LEDs on the front panel indicate tuning status, and will show a match in seconds, or even less of you've tuned on or near that frequency before the KT-100 has 2,000 memories for instant recall of the tuning parameters for your favourite bands and frequencies.

If you have an AT-300 compatible Kenwood radio, you can simply plug the KT-100 into your transceiver with the provided cable the interface powers the tuner, and the Tune button on the radio begins a tuning cycle.

The supplied interface cable makes the KT-100 a dedicated tuner for most modern Kenwood transceivers. There are no extra cables to buy.

Flexible, low cost, easy to use and just right for your Kenwood transceiver, the KT-100 is the latest in a long line of automatic tuners from LDG that fit in right were you need them the most

Key Features/Specifications:

• 0.1 to 125 watt power range (SSB and CW), 100W on 6M.
• 2000 memories for instantaneous band changing.
• Controlled from Kenwood Tuner button on radio. Powered from Kenwood radio.
• Works with any Kenwood radio that is AT-300 compatible.
• Partial radio list: TS-50, TS-480, TS-570, TS-690, TS-850, TS-870, TS-2000.
• Tuning time: 0.1 to 6 seconds full tune, 0.1 seconds memory tune.
• 1.8 to 54.0 MHz coverage. Built-in frequency sensor.
• Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional 4:1 Balun.
• For Dipoles, Verticals, Vs, Beams or any Coax Fed Antenna.
• Optional external Balun allows tuning of random length, long wire or ladder line fed antennas.
• Small Size Enclosure: 6.5L" x 6.5W" x 1.5H"