24VDC TO 12VDC VOLTAGE CONVERTER

This product offers a convenient way to operate mass produced 12Vdc equipment such as cell phones, professional communications, telematics equipment, etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels.

All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points allowing it to be mounted on uneven surfaces. A fixing kit for din rail installation is also available.

TECHNICAL DATA

• Input voltage range:17-32Vdc
• Output: 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc.
• Intermittent output power: 6A/3A non-isolated, taken for a maximum of 2 minutes followed by 8 minutes rest
• Transient voltage protection: International standard for 24Vdc commercial vehicles
• Electrostatic voltage protection: >8kV contact, 15kV discharge
• Output noise :<50mV pk-pk at continuous load.
• Off load current (quiescent current): <15mA
• Power conversion efficiency: Typically 90% for non-isolated units
• Isolation: >400Vrms between input, output and case, on isolated products only
• Operating temperature: -25ºC to +30ºC, +30ºC to +80ºC de rate linearly to 0A
• Operating humidity: 95% max., non-condensing
• Casework: Anodised aluminium, glass filled polycarbonate.
• Connections: Four 6.3mm push-on flat blade connectors, *5 way Phoenix connector including enable on/off terminal and mating half
• Approvals: 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive
• Designed to: EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B
• Markings: CE and E marked.
• Dimensions: 67x87x50mm
• weight: 200g