24VDC TO 12VDC VOLTAGE CONVERTER

These units are IP53, so there are no ventilation holes to permit stray objects, dust or water droplets to enter the case. Fuses will only blow if there is a fault so there is no need to make them accessible.

All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points, allowing it to be mounted on uneven surfaces. A fixing kit for din rail installation is also available.

TECHNICAL DATA

• Input voltage range: 17-32Vdc
• Output: 13.6Vdc +15% -20% at extremes of temperature.
• Intermittent output power: 6A/10A isolated, taken for a max.of 2min followed by 8min rest
• Electrostatic voltage protection: 8kV contact, 15kV discharge
• Output noise: 50mV pk-pk at continuous load
• Off load current (quiescent current): <15mA
• Power conversion efficiency: Typically 85% for isolated units
• Isolation: 400Vrms between input, output and case, on isolated products only
• Operating temperature: -25ºC to +30ºC, +30ºC to +80ºC de rate linearly to 0A
• Operating humidity: 95% max., non-condensing
• Casework: Anodised aluminium, glass filled polycarbonate
• Connections: Four 6.3mm push-on flat blade connectors, *5 way Phoenix connector including enable on/off terminal and mating half
• Approvals: 2014/30/EU The general EMC directive, Regulation 10 The automotive directive, 93/68/EEC The CE marking directive
;
• Designed to: EN50498, ISO 7637-2, ISO 11452-1, ISO 14982, EN12895, EN60945, EN55022, FCC15B
• Markings: CE and E (automotive) marked.
• Dimensions: 127 x87 x50 mm
• weight: 505g