This analyser is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100kHz to 230MHz

A built-in ZOOM capability makes graphical measurements especially effective.

An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

The following tasks are easily accomplished by using this analyser

Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads

Specification

Frequency: 0.1 to 230MHz
Frequency entry: 1KHz resolution
Measurement for: 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1-100 in numerical mode / 1-10 in chart mode
R&X range: 0…10000, - 10000…10000 in numerical mode /0…1000, -1000…1000 in chart mode
Dimensions: 82mm x182mmx32mm
Weight:236g
Operating temperature: 0-40 C (32-104 F)

Display modes

SWR at single or multiply frequencies
SWR return loss: R, X, Z, L, C at single frequency
SWR Chart: 20 - 500 points
R X Chart: 20 - 500 points
Smith Chart: 20 - 500 points
Return loss Chart: 20 - 500 points
TDR (Time Domain Reflectometer) chart
Cable tools (loss and characteristic impedance)
100 slots to save measurement results

RF Output

Connector: N type
Output signal shape square
Output power: -10dBm (at 50 Ohm load)

Power

Four 1.5V alkaline batteries, type AAA
Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
When the analyser is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

290×220 colour TFT display
6×3 keys on the water-proof keypad
Multilingual menus and help screens
USB connection to a personal computer

Bluetooth spec

Bluetooth Specification v.4.0 (BLE). Compatible with Android OS ver. 6.0 and higher. Analyzer AA-230 Zoom does not work through Bluetooth connection together with OS Windows and AntScope2.

Customer Reviews

Price

Quality

Value

Anaylser

Review by JB

I have tried them all and the AA 230 is but far one of the best and easiest ones to use a bit expensive but it is doing the job,

Testing antennas etc up to 230 Mhz.

Review by G4XIV

I like experimenting with my own aerials and found it most useful even in day light outside.

Rig expert

Review by Eck

Good piece of kit especially useful for checking coax for faults and accurate length measurement. As an antenna analyser it is really intuitive to use. Nice in the hand as the shape is well sized for the button access. Overall I am very happy with the purchase and an important part of test kit for home as well as portable use.

Operating the 230 zoom

Review by William

I purchased this analyser for portable operation.

The frequency range is ok up to VHF.
The many measurement features allow antennas to be analysed in detail in the field for getting the proper match to the tranceiver. I have other analysers but this is much better for portable operation

Allow Backorder in Clerk.io	No
Product Condition	New
Bar Code/EAN	5056109270856
Manufacturer	RigExpert
Item returned for technician testing period	14 days
Repair period	90 days
Refund period	14 days
Exchange period	14 days

429 Too Many Requests

Description / Discontinued RigExpert AA-230 ZOOM (0.01-230MHz) Analyser

More Information

Customer Reviews