This analyser is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 60kHz to 35MHz

A built-in ZOOM capability makes graphical measurements especially effective.

The following tasks are easily accomplished by using this analyser

Rapid check-out of an antenna
Tuning an antenna to resonance
Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
Making coaxial stubs or measuring their parameters
Cable testing and fault location, measuring cable loss and characteristic impedance
Measuring capacitance or inductance of reactive loads

Specification

Frequency: 0.06 to 35MHz
Frequency entry: 1KHz resolution
Measurement for: 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1-100 in numerical mode / 1-10 in chart mode
R & X range: 0…10000, - 10000…10000 in numerical mode /0…1000, -1000…1000 in chart mode
Dimensions: 103mm x207mmx37mm
Weight:310g (without batteries)
Operating temperature: 0-40 C (32-104 F)

Display modes

SWR at single frequencies
SWR return loss: R, X, Z, L, C and phase angle at single frequency
SWR Chart: 100 points
R X Chart: 100 points
10 slots to save measurement results

RF Output

Connector type: UHF (SO-239)
Output signal shape square 0.06 to 35MHz
Output power: +13 dBm (at 50 Ohm load)

Power

Two 1.5V alkaline batteries, type AA
Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
When the analyser is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

320×240 colour TFT display
6×3 keys on the water-proof keypad
Multilingual menus and help screens
USB connection to a personal computer

Customer Reviews

Price

Quality

Value

excellent bit of kit

Review by ken

Having been using a Nano VNA , for antennas checking . This piece of kit really surpasses what I've been using. found could do the job quicker and easier. having the So259 socket for direct connection is perfect for me and when used with it's own software is even better. only thing no BT on this model . but don't really need it, Yes I would recommend buying

Rigexpert aa35 zoom

Review by LAURENCE

The price has come down £100 recently, I just wanted an analyzer for HF 80 to 10m and I don't like taking out my aa650 zoom as it's x3 the price,
I mainly use it for pota, on the beach etc with a slide winder coil with the army telescopic antenna.
Very high quality with a large screen and comes with batteries and a protective case

Rig Expert AA35 Zoom

Review by Derick

I have used a Nano VNA and a Sark 100. In terms of usability it is far easier/quicker to use. For more in depth analysis connect to a laptop.

Ideal for my needs

Review by Robert

Does everything I expected it to do. Simple to use and gives appropriate data on the HF bands. Came with a protective cover and strap for hanging round your neck. Full instructions and also good value.

Really worked well tuning my G3RV antenna.

Review by David

Easy to use with clear instructions. A lot of functionality for a reasonable price!

Rig expert AA-35 zoom

Review by Stephen grey

Very happy with the anslyser just what I needed to check my antennas impedance ,swr ,great for tuning my cobweb. Was a great price also cheapest I could find .many thanks moonraker

Allow Backorder in Clerk.io	No
Product Condition	New
Bar Code/EAN	5056109270832
Manufacturer	RigExpert
Item returned for technician testing period	14 days
Repair period	90 days
Refund period	14 days
Exchange period	14 days

Description / Discontinued RigExpert AA-35 ZOOM (0.06-35MHz) Analyser

More Information

Customer Reviews