RigExpert REAMP - Power Consumption Logger
Description / RigExpert REAMP - Power Consumption Logger
REAMP: Accurate power consumption logger to ease the life of IoT developers.
When you want to achieve the longest battery life possible, you need an accurate and reliable power measurement tool. So REAMP is the best choice for your Ultra-Low Power projects. REAMP acts as a very stable and accurate power source for Device Under the Test (DUT). This allows to see even subtle changes in the power consumption profile of the DUT.
Use REAMP at your ULP DIY projects to quickly achieve success.
Features:
- High accuracy current measurements in the wide range from lOµA to lА
- Two channels for voltage measurement
- 10 Hz to 10 kHz sample rate
- TRIG and SYNC gates to synchronize logger with target Ьоага and vice versa
- Time-limit and infinite measurements modes
- Built-in Li-Ion battery for cases when DUT current consumption is over 500 mA
- Comprehensive power consumption analysis with РС software
- Easy navigation both for small or extremely large measurement data sets, zooming and scrolling features
- Consumption averaging as well as real-time analysis
- Battery Life Calculator
- Ready-to-use Multi-0S software for Windows®, Linux® and macOS®
Technical Specifications*:
- Number of Measuring Channels: 3
- Measuring Range: Current – 10μA to 1А (1 channel) | Voltage – 0V to 5V (2 channels)
- Sample Rate: 10Hz…10 kHz (10 kHz one channel only)
- Measuring results displaying: Instant values graph, average values in digital format, saving data to a log, easy navigation using horizontal and vertical zooming
- Power supply: PC USB port, additional built-in Li-ion battery to be used when current consumption is over 500 mA
- Interface: USB connection to a PC (USB 2.0, USB 3.0), Operation system Windows 7, Windows 8, Windows 10, Application software “REAMP Logger”, 3 languages support (EN, UA, RU)
- Dimensions: 67 mm x 57 mm x 27 mm
- Operation temperature: 0…40 ÅãC
- Weight: 100 g.
- Warranty: 2 years
- GTIN code: 4820185420334
* All specifications are subject to change without notice or obligation.
Included in Box:
- RigExpert REAMP Logger (with a Li-ion battery type 14500)
- USB cable
- Set of test leads
- Anti-slip silicone feet
REAMP Logger made in Ukraine.
More Information
| Allow Backorder in Clerk.io | No |
|---|---|
| Product Condition | New |
| Bar Code/EAN | 5056109277633 |
| Manufacturer | RigExpert |
| Item returned for technician testing period | 14 days |
| Repair period | 90 days |
| Refund period | 14 days |
| Exchange period | 14 days |
Product Attachments
Customer Reviews
Price
5
Quality
5
Value
5
The REAMP is an excellent tool for dynamic power analysis.
Review by
Dave
For anyone experimenting with MCUs and low power IoT devices, the REAMP is a great little product. It allows dynamic measurement of device currents from µA’s up to 1000mA.
The output voltage is configurable from 1.8V to 5.2V and as well as monitoring the load current it has two voltage monitoring inputs. The built in Li-Ion battery avoids the use of two USB power sources for load currents greater than 500mA. The unit also has a SYNC output and TRIG input to allow synchronisation with the target device.
At the sale price of £59.95 it is really good value, with excellent service from Moonraker and superb technical support from RigExpert.
The screen capture attached is from the REAMP-Logger PC software and shows the current for an ESP8266 module. The average current is around 70mA, which is what would be shown using a DMM, but the peak currents of up to 200mA during WIFI activity can also be measured.
The output voltage is configurable from 1.8V to 5.2V and as well as monitoring the load current it has two voltage monitoring inputs. The built in Li-Ion battery avoids the use of two USB power sources for load currents greater than 500mA. The unit also has a SYNC output and TRIG input to allow synchronisation with the target device.
At the sale price of £59.95 it is really good value, with excellent service from Moonraker and superb technical support from RigExpert.
The screen capture attached is from the REAMP-Logger PC software and shows the current for an ESP8266 module. The average current is around 70mA, which is what would be shown using a DMM, but the peak currents of up to 200mA during WIFI activity can also be measured.
Write Your Own Review