Telescopic pole 10m Mini Fibreglass

This small and lightweight pole is easy to carry and ready to be build up within a minute

It is light and small enough to fit in any suitcase, it is developed rugged and durable

For this portable Mini pole we used a fixed screw bottom cap which is flat and padded inside. This gives the pole a stable stand and prevents the mast from unwanted extraction while hiking.

A special reinforcing winding technique - several layers of fiberglass are wound in alternating direction (criss/cross winding) - provides greatly increased lateral and linear strength. Stronger joints are achieved by a much larger overlap between the individual tube segments than usual.

Spiderbeam fiberglass poles are perfect for building all kinds of wire antennas

The Spiderbeam Mini poles are perfect for Geocaching, SOTA, IOTA and every traveling HAM.

Even the top segment is rigid and got a usable inner diameter of 4mm to carry your wire-antenna or attach your mini tool and application.

So the pole can be used to its full 10m length - unlike other poles where the top segment is very thin as a whip.

Specifcation

• Fully extracted length (height): 10m (32ft 10")
• Transportation length: 0.72m (28.5")
• Weight: 2.220kg (4lbs. 14 oz.)
• Bottom diameter Cap: 66mm (2 3/5")
• Bottom diameter Segment: 60mm (2 1/3)
• Top diameter: 6mm (0.24")
• Wall thickness: 0.7mm - 1.4mm (0.027-1/18")
• Number of segments: 17
• Pole material: black fiberglass, UV protected specially reinforced multilayer winding

Due to production variations, the dimensions shown may vary slightly. This does not alter the quality in any way.