Use RF Vox up to 100W  500W Bypass.

The pre-amplifiers of the Super-Amp series are available for the following amateur bands 6 m, 2 m, 70, 23 and 13 cm.

All models are equipped with super-low-noise, large-signal-resistant semiconductors which are safeguarded against HF by a an effective protective circuit. To suppress unwanted signals, high quality Helix filters are used.

The Super-Amp amplifiers can be operated with a remote or direct feed. When a power amplifier is used, they recommend their DCW-2004B Sequence Controller. This ensures a safe sequential receive/transmit switchover.

The Super-Amp amplifiers are equipped with an UV-resistant, weatherproof housing and N-sockets. Hot-dip galvanized clamps and installation material are part of the delivery. The max. mast diameter is 58 mm.

Specification

• Frequency: 430-440MHz
• Gain: 10-20dB
• Noise: 0.9dB
• 500W by-pass
• Insertion loss: 0.4dB
• RF-VOX: 100W
• Connector: N- type
• Supply: 13.8V DC  340mA
• Dimensions: 115 x 30 x 90mm
• Weight: 220g