USED ICOM IC-PCR1500, ORIGINAL PACKAGING, Considerably scratched

The IC-PCR1500 computer-controlled receiver is the long awaited successor to the ICPCR1000. It is designed for receiver enthusiasts and professional users. Covering 0.01 to 3299.999MHz in AM, FM & WFM modes (0.495- 1300MHz in SSB and CW modes), thisreceiver features versatile functions including a multi-channel monitor, bandscope and IF shift function to provide efficient reception for the user. PC Controlled Wideband Receiver The IC-PCR1500 is a PC controlled receiver and all functions are controllable from mouse click or keyboard input. It covers 0.01–3299.999MHz* in AM, FM & WFM (0.495–1300MHz only in SSB and CW modes). 1Hz fine tuning resolution is available in all bands. USB cable connection A USB cable is supplied for PC to receiver connection. This provides higher data transmission speed and allows you to transfer the received audio to the connected PC through the USB cable. It also allows you to hear or record the sound on your PC. Unlimited number of memory channels Memory channels are stored in your PC’s hard disk or other storage devices which means that the number of memories are only limited by your remaining memory space. 3 selectable interface screens To make operating easy the IC-PCR1500 has three interactive computer screens: “Compact” screen, “Component-style” screen and “Communications receiver” screen. • The first is a “Compact” screen, a simplified screen that is small enough to run alongside other applications. Replicating a piece of hi-fi equipment, this displays basic information such as frequency, whilst still providing immediate access to the important controls including volume and 5 quick access memory buttons. • The second is a “component-style” screen which is divided into 4 sections; “Tuning”, “Mode/Volume”, “Meter/Scan” and “Scope Panel”. This screen is suitable for users who are already familiar with a full-function communications receiver. • The third is a multifunctional screen that gives control of all functions and looks similar to an advanced communication receiver. Multi channel monitor function This function allows you to observe the status of up to 25 channels on the screen at a glance. According to the S-meter level, channel activities are indicated by three background colours on the screen. When you click a channel button on the screen, you can easily start listening to the selected channel. Two types of bandscope The IC-PCR1500 has two types of bandscope function, allowing you to easily observe the band condition within a specified bandwidth (25kHz to 5MHz) or a specified time period (3 to 100 minutes) and AF output* is emitted while sweeping the range. When you find a signal you want to listen to, click the waveform in the band scope screen and the receiving frequency moves to the clicked frequency. In addition, the band scope sweep data can be stored on the PC. When setting the bandscope range between 500kHz and 5MHz, AF output is not emitted. * AF output is not emitted in CW, SSB mode. High speed scanning of up to 60 channels per second The IC-PCR1500 has a maximum high speed scanning capability of 60 channels per second*. This scanning power provides the utmost efficiency when searching a wide frequency range. Auto memory write scan searches for a signal. When a signal is detected, the received frequency is automatically stored into an auto memory write channel bank. The following other scans are available:- • Full scan • Mode select scan • Programmed scan • Memory scan • Priority scan • Tone scan • Bank scan • Skip scan • Auto memory write scan • Program skip scan • Program skip area scan *Tuning step is 100kHz or less in program scan mode. VSC, CTCSS, DTCS tone and S-meter squelch • The VSC (Voice squelch control) opens the squelch only when a modulated signal is detected and ignores unmodulated, beat noise signals. • The CTCSS and DTCS tones provide quiet stand-by while waiting for a matched tone signal. • S-meter squelch releases the AF mute, when only signals stronger than the pre-set S-meter level are received. • Pocket beep function alerts you with a beep sound when a matched tone signal is received. DSP capability With the optional DSP unit, UT-106, you can add a noise reduction function, which improves the S/N ratio. Also, the automatic notch filter automatically cuts beat interference. These DSP functions pull out desired signals from noise, and provide superior receive quality. Other Noise reduction functions • IF filter selection • IF shift function (SSB/CW mode only) • Noise blanker (SSB/CW/AM mode only). Eliminates pulse type noise such as engine ignition noise. • 20dB RF attenuator (approx, below 1300MHz) • AFC function (Auto Frequency Control). Automatically compensates for frequency drift in FM mode and keys the receiver tuned to the centre frequency of the tuned station. (BW: 6KHz or 15KHz). • AGC function. Fast/slow setting is possible. OTHER FEATURES DTMF tone decoder Duplex operation Recording function ... Allows you to store received audio on the PC in WAV format Tuned bandpass filters for VHF/UHF bands SPECIFICATION Specifications described below are target values. They may be subject to change. GENERAL • Frequency coverage : 0.010–3299.999MHz* Guaranteed range 0.495–3000.000MHz • Mode : AM, FM, WFM, USB*, LSB*, CW* * 0.01–1300MHz only. • Usable temperature range: With controller 0°C to +60°C; +32°F to +140°F Without controller –10°C to +60°C; +14°F to +140°F • Frequency stability : Less than ±3ppm on the basis of 25°C (–10°C to +60°C) • Tuning steps : 1Hz (minimum) • Power supply : 12.0V DC ±15% • Current drain (12.0V DC, IC-PCR1500): Max. audio : 0.8A typ. Stand-by : 0.65A typ. • Antenna Impedance : 50Ω(BNC) • Dimensions (WxHxD, projections are not included) : 146x41x206 mm; 53⁄4x15⁄8x81⁄8 in • Weight (approx:) : 1200g; 2.6lb RECEIVER • Receiver system : Triple-conversion superheterodyne + Down converter • Intermediate frequencies : 1st 266.70MHz, 2nd 10.70MHz, 3rd 450kHz (Except WFM) • Sensitivity (Less than) : SSB, CW AM FM WFM 0.495–1.799MHz 5.0μV 25μV – – 1.8–49.999MHz 0.5μV 2.5μV 0.63μV*2 – 50–699.999MHz 0.4μV 2μV 0.5μV 1.4μV 700–1300.000MHz 0.5μV 2.5μV 0.63μV 1.8μV 1300*1–2299.999MHz – – 5.6μV 18μV 2300–3000.000MHz – – 18μV 56μV *1 1300.000001MHz *2 28–49.999MHz SSB, CW BW=2.8kHz, AM BW=6.0kHz at 10dB S/N FM BW=15kHz, WFM BW=230kHz at 12dB SINAD • Selectivity : SSB, CW, AM More than 2.8kHz/–6dB SSB, CW, AM, FM More than 6.0kHz/–6dB FM, AM More than 15kHz/–6dB FM, AM, WFM More than 50kHz/–6dB WFM More than 230kHz/–6dB • Audio output power : More than 500mW at 10% distortion with an 8Ωload • Ext. speaker connector : 2-conductor 3.5 (d) mm (1⁄8″)/8Ω PC REQUIREMENTS • Microsoft® Windows® XP/2000/ME/98SE • Intel Pentium® III 450MHz or faster (Pentium® 4 recommended) • Hard disk with minimum 50 MB of free disk space • Minimum 128 MB of memory (256Mb or more recommended) • USB 1.1 Note • CD-ROM or DVD drive is required for software installation • Mouse or other compatible pointing device is required • USB audio dropouts or gaps may occur, because of a lack of PC power. • Additional hard disk space is required for recording sound or storing scope data.