Yaesu adapter cable for WIRES-X with the FTM-400XDE / FTM-100DE. The SCU-40 cable set consists of a SCU-20 cable and a Y-Audio/Data cable.

• FTM-400XD MAIN Ver 4.40/ DSP Ver 4.31
• FTM-400D MAIN Ver 3.40/ DSP Ver 4.31*
• FTM-100D MAIN Ver 2.40/ DSP Ver 4.31/ PANEL Ver 2.10

Users can easily establish and operate a WiRES-X Portable Node Station by directly connecting the FTM-400XD, FTM-400D, and FTM-100D to the PC with the SCU-40. Same as the WiRES-X Portable Node with the FT2D, four (4) different types of operation modes are available.

The software contains some improvements and optimizations to operate a WiRES-X PDN (Portable Digital Node) with the C4FM transceivers – FTM-400XD, FTM-400D, FTM-100D and FT2D and a fixed WiRES-X node station with HRI-200.

With the Portable Digital Node function, the flexibility and mobility of the WiRES-X Network will be available all the time.

• That while the FTM-400D is supported it does require different MAIN version firmware than the FTM-400XD series.
• If customers are interested in operating his/her node as an Access Point for C4FM digital only or Direct Operation with other C4FM digital nodes only, only the SCU-20 cable supplied with the FTM-400XD/D and FTM-100D package is required.

Using this new Portable Digital Node Function, users can gain access to the WiRES-X Network directly by using the transceivers PTT and microphone. The need to have an additional radio to talk to a node radio is no longer needed in order to enjoy the WiRES-X Network.