President Washington 10m & 12m 80W Mobile Transceiver
In stock
- SKU
- 99-390
Description / President Washington 10m & 12m 80W Mobile Transceiver
President has always had a reputation for both quality and performance, and the new range continue this tradition.
Prepare to be blown away by the power of the President Washington 10m & 12m 80W Transceiver! This mobile rig packs a massive 80 watts of output for unbeatable transmission range on both the 10 and 12 metre bands. Whether you're cruising across town or traversing the countryside, the President Washington ensures you can always reach your fellow hams with incredible clarity. Treat yourself to a top-tier transceiver from a trusted brand. Upgrade your mobile setup today with the raw power of the President Washington!
Accessories supplied: 1 microphone UP/DOWN and its hanger , 1 mounting bracket with fixing screws , power cord with fuse
specification
- Frequncy ranges: 24.890 - 24.990 MHz and 28.000 - 29.700 MHz
- Moicophone plug: Front 6 pins
- Compatible microphne type: Electret, Dymanic
- Power supply: Nominal 13.8V DC, negative ground (10.5 VDC to 16.0 VDC)
- Antenna impedance: 50 ohms
- Antenna connector: SO-239
- Dimensions: W-170 x H-52 x D-250 mm
- Weight: 1.4 Kg
- Multiconfiguration: EU / U / D / PL / IN
- Channel preselection: 2, channel 9 & 19 , emergency channel (EMG) programmable
- Modulation modes: AM/ FM / USB / LSB
- CTCSS: 38 tones
- DCS: 104 codes
Transmission
- Frequency allowance: ± 200 Hz
- Carrier power: 70 W PEP (AM/USB/LSB) / 50 W (FM)
- Power limitation: 4/10W
- APM: Yes
- Transmission interference: less than 4 nW (-54 dBm)
- Audio response: 300 Hz to 3 kHz
- Emitted power in the adj. channel: Less than 20 μW
- Microphone sensitivity: 3 mV
- Drain: 6 A (with modulation)
- Modulated signal distortion: 2%
Reception
- Max. sensitivity at 20 dB sinad: 0.7 µV - 110 dBm (AM) / 0.35 µV - 116 dBm (FM) / 0.28 µV - 118 dBm (USB/LSB/CW)
- Frequency response: 300 Hz to 3 kHz
- Adjacent channel selectivity: 60 dB
- Maximum audio power: 3 W
- Squelch sensitivity: min. 0.2 μV - 120 dBm / max. 1 mV - 47 dBm
- Frequency image rejection rate: 60 dB
- Intermediate frequency rej. rate: 70 dB
- Drain: 400 mA nominal / 600 mA max.
More Information
| Allow Backorder in Clerk.io | No |
|---|---|
| Product Condition | New |
| Bar Code/EAN | 5056109286956 |
| Manufacturer | President |
| Item returned for technician testing period | 14 days |
| Repair period | 90 days |
| Refund period | 14 days |
| Exchange period | 14 days |
Product Attachments
Customer Reviews
As far as CB radios go this is pretty good. But it’s not a ham radio. Whilst it performs well on the ham bands that it covers, you have to be aware that your using ‘channel change’ mentality and not a VFO. In other words, you ‘click’ through the frequencies, not spin. For some that might be an issue.
Personally, I quite like it as an 11m transceiver. I get good audio reports all the time on the stock microphone, inbound audio is OK, tone tweak-able, not the best, but acceptable. It is also a fairly simple to drive radio.
Bad points. Not able to set step to 5 khz. Which does my nut in to be honest. I’d really like to have stepped through the 11m frequencies on the 5s and 0s. But, alas, just not possible. You can step through in 1khz (closest) using the span option in the menu settings, or by typical (11m) channel allocations. Just not in 5 khz steps. Grrr.